DACELL称重仪表DN-10W,详细产品资料点击  DACELL DN-10W 称重仪表

中国咨询热线：0755-86111857

DACELL DN-10W称重仪表，可以与称重传感器，压力传感器，位移传感器配合使用。

High resolving power (16bit A/D)---高分辨率
High precision (more than 0.012% F.S) and stability---高精度和稳定性
Quick sampling speed (100 times/sec)---采样频率高
Built-in Shunt calibration switch
Watch dog---“看门狗”功能
Calibration of actual load and sensor output value
Peak hold and Sample hold---峰值保持
Auto zero---自动清零
Small size (96×48×128mm),
Weight : about 700g

Specifications	Accuracy
	DN15W	DN10W
Application sensor	Strain guage sensor (350Ω or 120Ω)
Sensor authorized voltage (the number of Loadcell connection)	DC 5V, Loadcell(350Ω) available 4 DC 10V, Loadcell(120Ω) available 2	DC 5V, Loadcell(350Ω) available 4
Zero adjustment range	100% F·S (Auto Zero)
Input signal	1.0, 1.5, 2, 3mV/V (Dip switch)	0.5 ~ 3mV/V
Display	-19999 ~ 32767	-19999~99999
Display speed	Appox 30times/sec(Adjustment available by buff setting)
Character height	7Segment 5 digit LED 14mm
Decimal point	Random setting available
A/D converter	16bit, Max. 100 times/sec
D/A converter	12bit
Zero variation	within 0.5mV/℃
Sensitivity variation	within0.01%/℃
Voltage output		DC 0~10V (4~20mA : in accordance with customer request)
Usage temperature range	-10℃ ~ 60℃
Humidity	less than 80% RH (no dew condensation)
Power source used	220V 50/60Hz (110V available by internal operation)
Relay output		Upper and lower limit comparison output 4 relay output Contact capacity : AC 125V 0.5A, DC 24V 1A
Network		RS-232C
Option		BCD Paralle out (OP-01) RS485 (OP-02) DAC ANALOG OUT (OP-03)